|
|
Material Testing Machines |
|
|
|
| Rockwell Hardness Tester/System |
| Automatic load selection with automatic zero setting dial gauge. Manual Operation. |
| |
| Loads |
60, 100, 150 |
| Initial Load |
10 |
| Max Test Height |
230mm |
| Depth of Throat |
133mm |
| Max. Depth of elevation screw Below base |
240mm |
| Size of Base (Approx) |
171 X 423 mm |
| Machine Height |
635mm |
| Net. Weight (Approx) |
75kg |
|
| |
| Rockwell/Brinell Combined System |
| Automatic load selection with automatic zero setting dial gauge. Facility for Brinell Tests with 187.5 kgf. Load with 2.5 mm ball indentor, additional load 250 kgf. With 5 mm ball indentor for testing hardness of non ferrous metals. Manual Operation. |
| |
| Loads |
60, 100, 150, 187.5, 250 |
| Initial Load |
10 |
| Max Test Height |
230mm |
| Depth of Throat |
133mm |
| Max. Depth of elevation screw Below base |
240mm |
| Size of Base (Approx) |
171 X 423 mm |
| Machine Height |
635mm |
| Net. Weight (Approx) |
75kg |
|
| |
| Rockwell Hardness Tester/System |
| Simlar to BTI-MAT-102 but motorised model. Semiautomatic operation for production testing. Drive motor single phase 230V 50 cycles. |
| |
| Loads |
60, 100, 150 |
| Initial Load |
10 |
| Max Test Height |
230mm |
| Depth of Throat |
133mm |
| Max. Depth of elevation screw Below base |
240mm |
| Size of Base (Approx) |
171 X 423 mm |
| Machine Height |
635mm |
| Net. Weight (Approx) |
75kg |
|
| |
| Rockwell/Brinell Combined System |
| Similar to BTI-MAT-104 but bigger capacity Diamond Hoklder is guided in a set of two ball cage, which enables testing of small pins having dia. Less than 6 mm (upto 3 mm dia) |
| |
| Loads |
60, 100, 150, 187.5, 250 |
| Initial Load |
10 |
| Max Test Height |
295mm |
| Depth of Throat |
150mm |
| Max. Depth of elevation screw Below base |
310mm |
| Size of Base (Approx) |
210 X 470 mm |
| Machine Height |
845mm |
| Net. Weight (Approx) |
137kg |
|
| |
| Rockwell/Rockwell Superficial Combined System |
| Manual load selection with automatic zero setting dial gauge Manual Operation. Diamond Holder is guided in a set of two ball cage, which enables testing of small pins having dia. Less than 6 mm (upto 3 mm dia) |
| |
| Loads |
15 , 30 , 45 (Rockwell Superficial) 60, 100 , 150 (Rockwell) |
| Initial Load |
3 (Rockwell Superficial) 10 (Rockwell ) |
| Max Test Height |
295mm |
| Depth of Throat |
150mm |
| Max. Depth of elevation screw Below base |
310mm |
| Size of Base (Approx) |
210 X 470 mm |
| Machine Height |
845mm |
| Net. Weight (Approx) |
126Kg |
|
| |
| Brinell Hardness Tester |
| Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measures depth of ball penetration. This facilitates production testing with in tolerance limits by compression method. |
| |
| Loads |
500 to 3000 stages of 250 |
| Initial Load |
250 kgf |
| Max Test Height |
410mm |
| Depth of Throat |
200mm |
| Max. Depth of elevation screw Below base |
180mm |
| Size of Base (Approx) |
370 X 670mm |
| Machine Height |
1127mm |
| Net. Weight (Approx) |
450kg |
| Drive Motor |
0.33 - 415 w/p HP |
|
| |
| Universal Testing Machines |
Variety of Test - Tension, compression & Transverse. Continuous roll autographic "load-elongation" recorder. Various models max. Capacity ranging from 10 to 300 tones. Optional accessories include load stabilizer Attachments for Brinell Test Bend Test and shear test. Special accessories offered on request. Loading accuracy well within +- 1% |
 |
|
| Tensile Testing Machine |
| |
 |
TENSILE TESTING MACHINE for determining teh tensile strength and elongation of materials like wires, cables conductors, plywood, ferrous & nonferrous meterial
SALIENT FEATURES
- High accuracy of +-1% as per IS 1828.
- Three measuring ranges for accurate testing.
- Simple in construction and control for easy operation and maintenance.
- Load and Elongation Recorders are provided where ever necessary.
- A number of straining speeds are available for selection.
- Attachments for conducting compression, bending shear tests.
- DIGITAL DISPLAY of load and elongation can be provided with Data recording printer.
- Wide range of grips to suit variety of materials and shapes.
- Provision of adequate safety devices.
|
|
| |
Impact Testing MachineImpact Testing Machine
Designed for conducting CHARPY, 1ZOD and IMPACT TENSION Tests. The test methods confirm to IS 1757 - 1961, 1499-1959 and BS: 131 : Part 2 & 3, IS : 1598 - 1960, BS : 131 part I and ASTM E 32-47T.
The impact energy absorbed by the specimen during rupture is measured as the difference between the height of drop before rupture and the height of rese after rupture of the test specimen and is read on the dial scale.
SALIENT FEATURES
- Release of Pendulum by 'Two Hand Operation'
- Safety Guards for Protection
- Breaking Arrangement is provided for stopping the pendulum
Coupled with experience and expertise gained by manufacturing testing machines. Since 1966, the new "JUSTY" testers offers an unique standard of accuracy. Easy operations, reliability and consistency. |
 |
|
| |
| Portable Hardness Testing Machine(Digital) |
It is an advance integrated hardness tester distinguished by its very compact size, high accuracy, wide measuring range & simplicity of operation. It is suiatable for testing the harness of all metals. It automatically computes all Vickers, Brinell, Rockwell or Shore harness values. The impact direction can be set so that accurate values can be achieved at any angle.
- Hardness Scales : HRC, HRB, HRA, HV, HB, HS & HL
- Combined impact device & digital display - No cables
- Measures in any direction
- Re-chargeable
- Size : 150 x 22 x53mm
- Impact energy : 11Nmm
- Test tip : Tungsten Carbide
- Measuring accuracy : mean uncertainty ±4.5%
- Maximum hardness of sample : 980 HV
- Weight : 130gm
With a complete test block, plastic cover, charger and instruction manual. |
| |
